Design Layer Area Calculator

Purpose of this design layer area calculator

Using this design layer area calculator, you can calculate the sq.ft area of some false ceiling layers that are offset from walls and protruded from ceilings.

Functions of the Calculator

M+ To add the total quantity to the total sq.ft.

M- To subtract the total quantity from the total sq.ft.

MR To retrieve the total area calculation from memory.

Main Ceilings To switch to the main layers area calculator.

Tip: Once you save the total ceiling area to memory using the M+ button, click the total quantity to automatically get the total false ceiling cost estimation on our False Ceiling Cost Calculator.

How to calculate false ceiling area using this calculator?

To calculate circle or oval shape false ceiling design layers,

1. Select Circle / Oval from the Layer Shape.
2. Select Box Type (closed sides) or Cove Lighting (rope light provision) from the Layer Type.
3. Enter the layer's Length and Width in their respective fields, then click the Calculate button.

To calculate square or rectangle shape false ceiling design layers,

1. Select Square / Rectangle from the Layer Shape.
2. Select Box Type (closed sides) or Cove Lighting (rope light provision) from the Layer Type.
3. Enter the layer's Length and Width in their respective fields, then click the Calculate button.

To calculate Outlined circle or oval shape false ceiling design layers,

1. Select Circle / Oval (Outlined) from the Layer Shape.
2. Select Box Type (closed sides) or Cove Lighting (rope light provision) from the Layer Type.
3. Enter the layer's Length and Width into the respective fields.
4. Enter the Bottom Width of the protruded portion in inches, then click the Calculate button.

To calculate Outlined square or rectangle shape false ceiling design layers,

1. Select Square / Rectangle (Outlined) from the Layer Shape.
2. Select Box Type (closed sides) or Cove Lighting (rope light provision) from the Layer Type.
3. Enter the layer's Length and Width into the respective fields.
4. Enter the Bottom Width of the protruded portion in inches, then click the Calculate button.

Important Note: If it is a combination of box and cove type layers, select the box type for the calculation, then manually add the inner verticals' length to the base quantity after the calculation.