LED Strip Driver Calculator

Home » Calculators » Led Strip Driver Calculator

Input Voltage* Wattage Per Meter* Total Length in Meter*

Purpose of this LED strip driver calculator

Choosing the right power supply for LED strips can be tricky. Our LED strip driver calculator makes it easy—just enter your strip’s input voltage, wattage per meter, and total length, and we’ll instantly calculate the driver current in amps. This ensures your LEDs run safely, efficiently, and with maximum brightness. Ideal for false ceiling profile lights or cove lighting provisions, DIY projects, or professional lighting installs, this tool takes the guesswork out of LED driver selection.

Frequently Asked Questions — LED Strip Driver Calculator

Answers to the most common questions about calculating the right LED strip driver, including current (amps), voltage, and total wattage requirements for safe and efficient LED setups.

How do I calculate the right LED strip driver?

To size an LED strip driver, multiply your strip’s wattage per meter by the total length, then divide by the input voltage. Always add a 20–30% safety margin when selecting a driver to ensure reliable performance.

How many amps do I need for a 5-meter LED strip?

It depends on the LED strip’s wattage per meter and voltage. For example, a 12V strip using 4.8W per meter at 5 meters requires 5 × 4.8 ÷ 12 = 2A. With a safety margin, choose a 2.5A or higher LED driver.

What happens if my LED driver provides too little current?

If the driver cannot supply enough amps, your LED strip may dim, flicker, or fail prematurely. Always select a driver that meets or slightly exceeds the calculated current.

Can I use a higher amp LED driver than required?

Yes. LED strips only draw the current they need, so using a higher-amp driver is safe and can improve reliability, as long as the voltage matches your strip.

Do LED strips run on AC or DC power?

Most LED strips run on low-voltage DC power (commonly 12V or 24V). A driver or power supply converts AC mains to the correct DC output for your LED strips.

 Share ❯ ︿
 Top 
Sorry, your device's viewport width is very small. Please rotate your device in landscape mode.